Home Company Overview Network Enquiry Contact Us E-mail
 
Products  
Products
Eco-Friendly Tarpaulin
H.D.P.E Woven Fabrics
PE Tarpaulin
Tarpaulin Fabrics
 
 
 

 Lumber Covers

 
The protective covers known as tarps or tarpaulins have been in use for more than a century and are available in different types in the market. You must have most probably seen lumber covers covering anything from cars, trucks and boats. Lumber covers are made of plastic and used as storage and construction coverings. The lumber covers are ideal when waterproof protection is required. Lumber covers are sturdy and wind resistant, so it is very much beneficial to use in trucks carrying loads. Lumber covers come in different strengths, styles and colors. It is very much necessary to use lumber covers for your shipments because they protect your product against theft, rain, snow etc. If your products are covered with lumber covers it shows that you care for your products and that your products are worth protecting.
 
 
PE tape fabric, laminated, 150 g/m²
Tensile strength warp / weft 750 N per 5 cm
Tear strength warp / weft 185 N
 
Fabric
Type plain weave
Raw material warp / weft HDPE
Yarn type warp / weft folded tapes
Yarn count warp / weft 1000 Denier
Construction warp / weft 10 per inch²
Yarn colour warp / weft natural
 
Lamination
Type top / bottom extrusion
Raw material top / bottom LPDE
Thickness top / bottom 35 micron
Colour top / bottom black, blue, natural, olive green, white
 
Properties
Total weight 150 g/m²
Tensile strength warp / weft 750 N per 5 cm
Tear strength warp / weft 185 N
Temperature resistance -40/+80°C
 
Click to large Click to large Click to large
 
 
 
PE tape fabric, laminated, 200 g/m², UV 300 Kly
Tensile strength warp / weft 1000 N per 5 cm
Tear strength warp / weft
210 N
UV stability 300 Kly
 
Fabric
Type plain weave
Raw material warp / weft HDPE
Additives warp / weft UV stabiliser C2020
Yarn type warp / weft folded tapes
Yarn count warp / weft 1000 Denier
Construction warp / weft 12 per inch²
Yarn colour warp / weft natural
 
Lamination/coating
Type top / bottom extrusion
Raw material top / bottom LPDE
Additives top / bottom UV stabiliser C2020
Thickness top / bottom 50 micron
Colour top / bottom blue, grey, natural, olive green, orange or white
 
Properties
Total weight 200 g/m²
Tensile strength warp / weft 1000 N per 5 cm
Tear strength warp / weft 210 N
Temperature resistance -40/+80°C
UV stability 300 Kly
 
 
Click to large Click to large Click to large